Flexible Graphite Rings,Die Formed Graphite Ring-Wealson

: Office Paper Series; Printing & Writing Paper
: Flexible Graphite; Asbestos and Non-asbestos; Metal; PTFE(Teflon); Rubber
: Spiral Wound Gasket; Metal Jacketed Gasket; Graphite Gasket; Teflon (PTFE) Gasket; Compressed Asbestos Gaske; Non-Asbestos Gasket; Camprofile Gasket; Ring Joint Gasket; Flat Metallic Gasket; Die-Formed Graphite Ring; Gland Packing
: Carbon Black N220 (ISAF); Carbon Black N330 (HAF); Carbon Black N550 (FEF); Carbon Black N660 (GPF); Carbon Black N234 (ISAF-HS); Carbon Black N339 (HAF-HS)
: Organophosphine antiscale; Polycarboxylic antiscale; Bactericide and Algicide; RO Chemicals; Chemicals For Boiler; Organophosphoric Salts; Corrosion Inhibitor
: Gasket Machine; Carbon and Graphite Felt; Natural Flake Graphite; Other Materials; Carbon Additve; Expandable Graphite

Products infomation

Gasket and packing>> Die-Formed Graphite Ring >>Flexible Graphite Rings

W201D Die Formed Graphite Rings
Die-formed Graphite Ring is made of low-sulphur expanded graphite without any fillers or binders. They are compressed in precise moulding tools to the required density. Due to the high purity of the material (>99%), no special corrosion protection is required. In general, it has square section and also has V-shaped and wedge-shaped section, the rear two kinds style are suitable for high pressure sealing.
W201R Reinforced Graphite Rings
Moulded from pure flexible graphite with reinforcement, the insert materials stainless steel foil or mesh etc. are available on request. To protect against oxidation, the stainless steel cap is necessary.
＊High Carbon content 99% Min.
＊Contains no rubber or binder, 100% Asbestos free.
＊Widely working temp. from -200℃ to +3300℃ in non-oxidizing.
＊Max. working pressure: 700bar.
＊Chemistry resistance, oxidation resistant and corrosion resistant.
PARAMETER:

	Fans (Dry running)	Agitators	Valves
Pressure	10Bar	50Bar	800 Bar
Shaft speed	10m/s	5m/s	2m/s
Density	1.2~1.75g/cm³ (Normal: 1.6g/cm³)
Temperature	-220~+550°C (+2800°C in non-oxidizing environment)
PH range	0~14

DIMENSIONS:
As pre-pressed rings (full or split)
Straight cut and slanted cut on request.
Supply size:
Min. cross section: 3mm
Max. diameter: 1000mm